Sapphire Orion
Focal Plane Array
Photovoltaic Indium Antimonide
Array Format
320 x 256
Pixel Size / Fill Factor
30 micron x 30 micron / 100%
Spectral Range
1.5 - 5.5 microns, Cold Filter Limited to 3.0 - 5.0 microns
Dynamic Range
> 1000:1 Typical
Operability
> 99.5%, > 99.7% Typical
FPA Operating Temperature
77 K
NEdT (camera level)
< 15 mK (including optics and window)
FPA Frame Rate
59.94 frames/sec NTSC, 50 frames/sec PAL
Digital Video
14-Bit (uncorrected, corrected, pixel replaced);
8 or 16-Bit (post transform)
Non-Uniformity Correction Tables
Up to 3 available
Video A/D Resolution
14 Bits
Calibration Flag
Ambient and Elevated Temp,
Automated / Periodic One Point Refresh
External Timing
External Sync and External Clock
Remote Control
RS232, RS422 full duplex or RS485 half duplex (factory set)
Power Input
+12 VDC or +24 VDC Nominal (factory set)
Power Consumption
< 11 W typical @ 25°C ambient,
< 16 W typical during cooldown
f/4.1 Optics
(can be purchased as an optional item,
will add to overall size and weight)


| |
![]() |
| |
|
![]() |
Viso-Therm Infrared products
may be subject to Export restrictions administered by the US Departments of Commerce or Canadian Departments of Commerce.
Please contact the US Department of Commerce or the Canadian Department of Commerce for assistance.
Viso-Therm Infrared products
are for legal use only.
It is the sole responsibility of the purchaser to determine local, state, and federal regulations prior to purchase.
We will not be held responsible for any illegal use of our products.
We reserve the right to refuse shipment to any person for any reason.